MACBOOK MEMORY UPGRADE WORTH IT UPGRADE
MACBOOK MEMORY UPGRADE WORTH IT FULL

MACBOOK MEMORY UPGRADE WORTH IT UPGRADE

Be advised, however, that a faster GPU will usually be the better system upgrade if you have to pick between RAM and graphics, and canвЂ™t afford to do both. If youвЂ™ve already got 8-16GB of DDR3-1600 I wouldnвЂ™t bother, but if you opted for DDR3-800 to DDR3-1066 when you built your system and have just 4-6GB of memory in it, you may see some modest improvements for relatively little cost. Intel switched to an uncore clocked at base CPU frequency with Sandy Bridge, which typically means 3GHz or more.ДDR3-2133 should be considered the highest-end вЂњpracticalвЂќ upgrade clock for older hardware. This will limit the benefit you see from faster DDR3 unless you also overclock the uncore clocking memory faster than the memory controller rarely results in improved performance.ДЄMD Bulldozer and Piledriver CPUs both use uncore clocks around 2.2GHz, as do the companyвЂ™s APUs. The Phenom IIвЂ™s е…ѓ cache and integrated memory controller were clocked at 2GHz, while the Core i7 920 and 940 were clocked at 2.13GHz. AMDвЂ™s Phenom II and first-generation Intel Core i7 products (Nehalem microarchitecture, codenamed Bloomfield or Lynnfield) all used вЂњuncoreвЂќ clock speeds well below the CPU clock.

There are, however, some caveats to this position. Higher frequency kits arenвЂ™t always offered in the multiples of 3 that the old X58 motherboards liked best, but if you can find a DDR3-1866 kit that matches your board and doesnвЂ™t cost much more, IвЂ™d say go for it. 12GB of DDR3-1600, for example, is around $60 at Newegg. The answer here is probably, but I wouldnвЂ™t go overboard. If youвЂ™ve got a Core i7 rig from this era with 4GB to 6GB of relatively low-speed DDR3, is it worth upgrading to high-speed RAM? There are plenty of first-generation Core i7 systems that likely opted for DDR3-1066.

Upgrades are another area that deserve consideration.

MACBOOK MEMORY UPGRADE WORTH IT FULL

Skip this step, and you may well end up with memory that canвЂ™t reach its full potential in your system. Single-sided DIMMs tend to tolerate high frequencies and low latencies better than double-sided memory, and you ideally donвЂ™t want to use more than one DIMM per channel unless your motherboard vendor specifically recommends differently. Keep in mind that running high RAM clocks is often at odds with running large amounts of memory. If, on the other hand, you want to run maximum clock speeds, take the time to review precisely which RAM your motherboard vendor recommends you use. One major point to be aware of if you intend to try and run extremely high memory clocks: If youвЂ™re buying a bunch of DDR3-1600 (or DDR4-2133) to stick in a box, you probably donвЂ™t need to worry about sticking to the вЂњmanufacturer recommendedвЂќ section of your motherboard manual.

The choice of resolution (1080p) and potentially even the use of FCAT over FRAPS could also have played a part. ItвЂ™s possible that weвЂ™re seeing the impact of new game engines or that the GTX Titan X that Digital Foundry used was powerful enough to show an impact, whereas previous video cards were not.

Medium answer: It depends on other system components, workload, and whether or not youвЂ™re using integrated graphics. Short answer: Sometimes, but not by much. Does faster RAM boost system performance? WeвЂ™ll explore current price and the performance question later in this guide. The reason to use DDR4 at this point has more to do with long-term memory pricing trends and future compatibility than fundamental performance. ThatвЂ™s less true than it used to be, and it may make sense to upgrade a DDR3 system depending on what you have and when you bought it. In the old days, a computer stuck on, say, PC133 SDRAM was at an intrinsic performance disadvantage compared with systems that used DDR, particularly at higher clock speeds. With that said, if your system does use DDR3, thatвЂ™s not the problem that it used to be. If youвЂ™re building a new system and donвЂ™t have a specific reason to use DDR3, weвЂ™d recommend buying hardware thatвЂ™s compatible with DDR4. Right now thereвЂ™s plenty of DDR3 systems still being sold, but DDR4 has already begun to replace it on the mass market.

Macbook memory upgrade worth it